| StarQuest USA Open to all Starion and Conquest enthusiasts. |
| | Fucked up pulley | |
| | Author | Message |
---|
Dz Nutz Administration
Posts : 298 Join date : 2010-11-24 Age : 49 Location : Sycamore, OK
| Subject: Fucked up pulley 2011-01-21, 7:58 pm | |
| | |
| | | caliber308 14a
Posts : 42 Join date : 2010-11-27 Location : Paulden,AZ
| Subject: Re: Fucked up pulley 2011-01-21, 10:20 pm | |
| Do you have Metal Eating Mice in your neighborhood????
Bill | |
| | | Dz Nutz Administration
Posts : 298 Join date : 2010-11-24 Age : 49 Location : Sycamore, OK
| Subject: Re: Fucked up pulley 2011-01-22, 8:48 am | |
| I think it may have had a hairline fracture from a couple years ago when I left the wrench on the crank & started it. From then it was just time before she unwound I'm afraid
| |
| | | caliber308 14a
Posts : 42 Join date : 2010-11-27 Location : Paulden,AZ
| Subject: Re: Fucked up pulley 2011-01-22, 5:35 pm | |
| - Dz Nutz wrote:
- I think it may have had a hairline fracture from a couple years ago when I left the wrench on the crank & started it. From then it was just time before she unwound I'm afraid
That will do it. Your lucky it didn't fly off & do more damage. Bill | |
| | | Dz Nutz Administration
Posts : 298 Join date : 2010-11-24 Age : 49 Location : Sycamore, OK
| Subject: Re: Fucked up pulley 2011-01-23, 9:01 am | |
| Replaced the pulley to find the crank pulley split. FUCK. So I go digging through my boxes of parts in the garage just to be sure I do not have one of those either. BAM! I lift an oil pan out of a box & there sits an 89 crank pulley along with an 89 WP pulley & PS pump. So I am upgrading to the 10mm belts today! Also replacing the seal while the pulley is out. | |
| | | UlrichWolf Moderation
Posts : 49 Join date : 2010-12-02 Age : 49 Location : Kansas
| Subject: Re: Fucked up pulley 2011-01-23, 11:04 am | |
| | |
| | | Dz Nutz Administration
Posts : 298 Join date : 2010-11-24 Age : 49 Location : Sycamore, OK
| | | | Dz Nutz Administration
Posts : 298 Join date : 2010-11-24 Age : 49 Location : Sycamore, OK
| Subject: Re: Fucked up pulley 2011-01-29, 11:20 am | |
| Well it looks like I need to replace the water pump. It is making noise now & beginning to seep out the weep hole. I am not surprised because of the damage to the pulley.
Found a NEW one through NAPA for less than $50 so I am going to do that. While I am at it I think I will put my other front cover on since I have the gaskets for it. Gimme a chance to peek in at the timing chains & such too. | |
| | | Sponsored content
| Subject: Re: Fucked up pulley | |
| |
| | | | Fucked up pulley | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| March 2024 | Sun | Mon | Tue | Wed | Thu | Fri | Sat |
---|
| | | | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | Calendar |
|
|
|