StarQuest USA

Open to all Starion and Conquest enthusiasts.
 
HomeRegisterLog in

Share | 
 

 Poly Torque Tube Bushings

View previous topic View next topic Go down 
AuthorMessage
Guest
Guest



PostSubject: Poly Torque Tube Bushings   2011-03-25, 11:27 am

I know everyone is waiting for MK1 to release the poly torque tube bushings. There is an alternative! First we the SQ community would need to know what kinda of interest there would be for them. There are companies who already make them for a different car. Only difference is that the mounting holes are roughly a 1/4 too long. The Subaru STi cross member bushing is basically a 1/4 longer SQ torque tube bushing. The dimensions are right but the holes are a tad bit off.

Picture of a Turn In Concepts STi Cross Member Bushing.



Back to top Go down
 
Poly Torque Tube Bushings
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Proper Torque Tube Alignment .pdf
» NEW Torque Tube Bearings--VERY nice!
» Torque Tube / drive shaft spline issues
» Torque tube bearing inspection
» Proper Torque Tube Alignment .pdf

Permissions in this forum:You cannot reply to topics in this forum
StarQuest USA :: Community :: ALMOST Anything Goes-
Jump to: