StarQuest USA
Would you like to react to this message? Create an account in a few clicks or log in to continue.
StarQuest USA

Open to all Starion and Conquest enthusiasts.
 
HomeLatest imagesRegisterLog in

 

 First Generation Eclipse Fan Motors

Go down 
AuthorMessage
Guest
Guest




First Generation Eclipse Fan Motors Empty
PostSubject: First Generation Eclipse Fan Motors   First Generation Eclipse Fan Motors I_icon_minitime2010-11-29, 6:33 pm

First Generation Eclipse Fan Motors

Tools Needed:

Wire Cutters/Strippers, Socket Set, Pliers, Flat Tip Screwdriver, Philips Head Screwdriver, Heat shrink Tubing, Soldering Iron, Electrical Tape

Description:

* If your Starquest cooling fan motors take a dive, you can use motors from a 1st Generation Eclipse (90-94). Minimal effort is needed to complete the task.

Step 1:

* Disconnect negative battery cable.

Step 2:


* Remove fan shroud from in front of the radiator. BE SURE CAR IS COOL.

Step 3:

* Remove the malfunctioning fan and motor from the shroud.

Step 4:

* Cut off the Starquest wire plug with as much wire as possible. Strip back 0.25 of an inch on all wires to be soldered. Solder the wires to the Starquest plug. Did you remember to put heat shrink on the wires loosely first?? Heat shrink the wire connections and wrap electrical tape around them tightly.

Step 5:

* Reinstall the fan shroud onto the car. Re-connect the negative battery cable, and fire it up. Check for normal fan operation.
Back to top Go down
 
First Generation Eclipse Fan Motors
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
StarQuest USA :: Tech Area :: FAQ, Write Ups, and Tech Answers-
Jump to: